How to Draw Gold Paint Tool Sai
How to Draw Glass Clip Studio Rouge
13,572 views
Hi! My name is Shani and In this tutorial I'd equal to show you my dearie tricks and techniques to help you create the illusion of transparency care I did in the drawing below.
Gossamer items can be very confusing to draw.
I mean - how can you possibly draw something if it doesn't have some coloring?
the first part of this tutorial will excuse the basics of drawing off glass and the second part will expand and put those rules to activeness by house painting a mermaid exclusive a bottle.
Basics of Drawing Chalk
Before we start drawing, lets just make sure we are on same page
When sparkle can make pass through an item, that means information technology has transparent qualities.
The Sir Thomas More light is able to hand over through the more gossamer an physical object is.
Examples of square items: glass, water, and air.
materials that allow some light to pass across them are titled translucent, If an object does non allow any light to pass through it then it is milky.
You can create the illusion of transparency in your drawings if you observe how light, shadow, reflection and value acquit on transparent objects under different environments.
Lets get going!
Opaqueness
obvious objects usually have frown opaqueness.
Opacity is the extent to which something blocks light. when You draw digitally,You rear change the opacity of layers, brushes filters, and effects.
VALUES
Value defines how light or dark a given color or imbue can be. Values are best silent when visualized as a scale or gradient, from dark to light.
When shades of like-minded rate are used together, they besides create a low direct contrast image.
The more opaque an object is the more it blocks light. because of this, when we look through transparent objects like glass the color economic value of what you find out through it will be lower and have less contrast.
Let Maine show you an example:
SKETCH
When sketching transparent items I recommend to enjoyment a reference or to study an physical object that looks similar to what your'e trying to draw. observing is key to a successful sketch!
Try using general shapes like ellipses to guide you and help delineate the broad 3D shape of the targe. try to see where the object has polar planes and where it curves.
glass is usually the most visual where it is thickest and to the lowest degree ocular where it is hollow, thusly adjudicate adding lines in areas of the object that are thicker- the bottom of the glass or the lip, detailing, zarfs and handles.
HIGHLIGHTS AND SHADOWS
after your'e done with the vignette, you'll deficiency to move on to adding a downpla, shadows highlights and reflections.
Note that glass reflects the light around it and ordinarily has very defined highlights.
For highlights I recommend using a hard-bordered brush.
For the shadow, try using a combine if balmy and gruelling brushes.
I'll explain and expand more on this steps in the incoming part of this tutorial.
here is a guide if you're non steady about the difference between this types of brushes:
OVERCAST SHADOW
like other objects Glass also casts a darkness.
Since methamphetamine hydrochloride it is transparent the overcast shadow mirrors the highlights and shadows of the object- it wish follow lighter where there are highlights and darker where at that place are shadows.
In the moment part of this instructor I will demonstrate how you can use the clear transform tool to reach this effect.
Immediately that we are done with the basics
LETS START DRAWING!
Step 1: Sketching and Line Artistry
Create a new A4 size canvas, make a point you fructify the firmness at 300dpi.
Using the pencil creature I first off by sketching my drawing and the object I want to stimulate transparent. I decided to pull down a cute elflike mermaid inside a corked bottle.
When sketching transparent items- keep your lines minimal while still gainful attention the broad shape, the diametric planes and curves. Don't leave this object is 3D thusly we can view the back side of it as fortunate!
I usually keep my drawing as a very elaborated chalk out so look free to add melodic line art to your drawing to match your panach.
Step 2: Coloring Solid Objects and Characters
After I clos sketching, I rouge anything that is non transparent. In this case I added base color and shading to the mermaid and cork.
Step 3: Adding the Background
when an object is wholly transparent IT doesn't bear a coloring of its own. Instead, it reflects the lights and colours roughly information technology.
So adding the scop is a very available fashio to make a transparent object personify seen.
In a layer underneath the original sketch I add a setting. Doesn't consume to be anything likewise fancy! Even a acerose background leave behave 🥰
Using the g-pen I add together a base color, and on the same layer I start adding and layering different colours.
Once I'm satisfied with the color palette, I star blurring and blending everything put together. You tin achieve this in two slipway- using the slur over tool
or the Gaussian Blur (which you can receive aside going to filter> confuse> Gaussian Blur.
Here is a easy version of the process:
And here is the progress happening our drawing.
Use the finger tip tool with long downwards strokes to create the illusion of a table/surface.
Step 4: Base Coloration
In a bran-new layer using a laborious-edge brush, complete the transparent token with a light color in.
spick-and-span the edges As requisite.
TIP : if you want to make sure you only color ONLY inside the lines
use the wand tool happening your lineart layer and select all areas your object.
press CTRL+Displacement+I to invert the selected area, you now have the entire object selected.
go to a new layer and start fill paint with nary mistakes :)
When cooked food coloring, set IT to a lower opaqueness. (I lowered mine to 18%)
The more transparent an object is the lower you should lay out the opaqueness at this stage.
If your glass has color or is tinted- use a imitative tinge that matches it and lower its opacity.
(for instance a red cup will have a red base)
Step 5: Create Shadows
Now onto for the fun part!
To start blending first adjudicate where the light in your drawing is coming from.
Picking a light source is important in guild to understand how the light will hit and reflect off the surface.
Using a reference, I distinct the buoyant in this piece comes from stern the nursing bottle.
shading and highlighting requires delicately building layers with low opacity on top of each other.
open a untried layer above our base color but at a lower place the course art.
Connected this layer I bulge past adding in the darkest areas.
Use the Orlando di Lasso tool to first city block down the area that is darkest.
Fill it using the G-pen brush and a darker shade (I used a navy blue)
Keep going adding brush strokes and patches of color until satsified only micturate sure to leave a lot of areas unswayed.
When adding in shadows Its important to follow the anatomy and curves of the object.
If you're not indisputable where to color-
We usually see shadow at the edges or walls of a hollow pellucid object because that is where the physical object is thickest and blocks more dismount.
If you attend closely at a cup Oregon a bottle, areas like the hindquarters, holders, zarfs, the "neck" of the feeding bottle are thicker and narrower so they normally have more shadows and reflect more Christ Within.
Areas like the body of the bottle are wider and hollower indeed they let more light through with and create fewer shading.
Note that the light source and surrounding surroundings can affect highlights and shadows.
If on that point is no bright light source- effort shading areas that are thicker and also areas where cardinal objects connect- comparable the neck and body of the bottleful, the bottom of the bottle and the table.
following, use the blur creature (I use a littler size brush for the blur then the one I consumption to fill the color)
film over a few of the hard edges to produce a softer effect. Cause NOT blur everything! Stress to keep leastways a couple of harder look edges to create the glass-suchlike effect.
Set the layer to a lower opaqueness (I set mine at 30%) and change the blending mode to multiply.
Footprint 6: Add Highlights
Transparent objects usually have a vey hard-edged highlight.
in order to achieve this Create a new layer.
Once again using a hard brush (I used G pen) sketch out the highlights. Use variant brush direction and strokes that follow the natural shape of the detail.
For example this bottle has a identical elongated shape so I used long tidy lines and the added more shapes to define the volume. I also added smaller lines and dots to create more glisten.
TIP: Never shade or foreground with pure undiluted Oregon white, judge victimisation very pale or very dark saturated colors like light super/yellow and dark blue/purple
Countersink the layer blending modes light light. Double the layer with this effect for more dramatic results.
Play or so with the layer setting for different effects! Different blending modes like: add (glow)/overlay/ flag temperate etc.. can all produce beautiful glow-y results.
Repeat/fix steps 5&A;6 of shading and inflammation until satisfied.
NOW you butt stop here for a simplified look OR you can continue the fun by...
Step 7: Adding reflection
Using the eyedropper tool pick colours from the background and solid objects look-alike the mermaid.
Following, use a softer brush to add reflections with this colours. I ill-used the Gouache brush because it has low opacity and a slight texture.
bi the brush into an eraser by clicking the square under the color in slipper and erase parts of the color.
I suggest adding each different vividness on a seperate layer.
reprise this step and keep goin layering distinguishable colours. lower the opacity of each stratum as needed.
alternatively, you can determine the layer mode to "screen" to get a take down opacity.
add justified to a greater extent shading around the cork and bottom of the bottle on a layer set to multiply.
water
Along a new level, exploitation a small hard brushing paint the edges of the water. Anywhere the water touches some other Earth's surface add small circular lines just to move over a hint that there is reflection from the water there.
Next haulage in small bubbles on a layer set to add (glow). For this step I drew small bubbles with the g-pen brush and also with a special bubble brush I downloaded from the clip studio paint assets.
Add tiny rays of light with cobalt blue.
I set my level to "overlay" and used a soft brush to add long diagonal lines.
Fins
Go the the layer where you painted the character's base colorize.
Select the fin with the lasso puppet.
Cut and paste it on a new layer (CTRL+X CTRL+V), lower the layer opaqueness to 50%.
Add another layer on top, draw detailing and highlight with a soft brush.
Stone's throw 8: radiance and final touches
In gild to create the cast shadow, original you'll necessitate to finish Totally your shadows and highlights.
Sum up glow around the drinking glass Using white or a very light vividness. set the layer to "lenient light" operating room "add (glow)".
blur outside edges a trifle.
Step out 9: Overcast Shadow victimisation Free transfrom
The cast shadow of a hollow transparent object usually resembles the object's transparency: transparent in the middle and opaque at the edges.
To produce the overcast Shadow eldest go to layer>drop image
now completely your layers are incorporate to one.
Then select the nursing bottle exploitation the lasso tool.
Copy the selected area and undo the steps until all the layers takings.
spread your selection on a new layer
set this layer at the very upmost of all layers.
Change the layer blending mode to soft insufficient or overlay or silver screen.
Using the free transform tool (ctrl+shift+t or edit>transform>free transform)
Drag the selection down and pulling it to produce a reflection.
make sure the angle is opposite to where your light author is orgasm from, so if my light comes from behind the bottle, the shadow will continue toward the viewer.
press OK to end up transforming.
highlight the edges with a very small white hard-boundary brush.
blur the halfway a little and.. Voila! you've got yourself an cloud over shadow!
Step 10: color correcting
Go to Stratum> New color correction bed> Color Balance
Correct until you like the colouring palette.
Before:
After:
and that is the result!
I hope you enjoyed recital this tutorial A much arsenic I did creating it.
Now it's your turn to go wealthy person fun drawing transparent items!
Users who liked this Wiley Post
How to Draw Gold Paint Tool Sai
Source: https://tips.clip-studio.com/en-us/articles/3432
Post a Comment for "How to Draw Gold Paint Tool Sai"